iPhone bending correction repair tool is used to straighten the back of the battery cover to solve the bending of the body
How to use
1. Firstly, remove the screen, but the SIM card slot in the mobile phone needs to be inserted.
2. Put the iPhone into the panel press.
3. Adjust and align the rubber beds into their corresponding positions.
4. Put the rubber beds on the bottom and where begins to bend and the end of the bending place.
5. Tighten the one screw knob in a anticlockwise direction to affix the device.
6. Locate the bend line and position the pillar bed.
7. Visually inspect the device while turning the knob.
8. Tighten the knob until a visible over bend is present.
9. Begin o loose the two knobs in a clockwise direction to release devise and remove device from the panel press.