Articles

MOPA laser marking machine applied to stainless steel color markingWhen marking stainless steel materials, laser can change the color variation of the surface layer by adjusting the laser beam, thu...

The first-generation airbag laminating machines, MT-13, MT-16, and MT-18 by M-Triangel, boast a sleek and compact design that exudes a futuristic appeal. These cutting-edge laminators utilize airba...

Better precision: Ultraviolet laser machines have a shorter wavelength than fiber lasers, so they can produce smaller spot sizes and finer details, which results in better precision. This makes t...

Fiber laser marking machines have become increasingly popular in recent years due to their high precision and efficiency. These machines are capable of marking a wide range of materials, including ...

Are you still using edge mold laminated glass? Laminateting molds have  advantages and can help technicians position glass, but they are expensive. After a lot of practice by technicians, we found ...

  MT-13/16/18 new generation laminating all-in-one machine supports up to 16" LCD respectively, which is suitable for either small size cell phone or iPad tablet. Compared with the traditional fla...

The laser generator or laser source of the laser marking machine consists of a laser, 2 power cords, a yellow optical fiber and a cylindrical beam expander. These three are a whole and cannot be br...

Tip: This is just an introduction, if you are a cell phone repair master, ignore this article. Cell phone repair industry is currently a popular industry, we can find a variety of cell phone repair...

When pasting OAC adhesive, do you put it on the glass cover or on the LCD? The recommended practice by the M-Triangel team is to paste it on the display because it is convenient to cut the excess O...